Prihvaćeni radovi

O-1 - Oralna sesija 1 / Oral session 1
16.03.2022, 15.30 - 17.15, Sala 1 / Room 1

O-1.1 (17) Distance protection of 400 kV transmission line Gacko- Trebinje
Vaso Milišić, "Elektroprenos-Elektroprijenos BiH" a.d. Banjaluka
Miodrag Forcan, Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet

O-1.2 (22) Analiza efikasnosti APU operacije u 2020. i 2021. godini na prenosnim dalekovodima u BiH – Operativno područje Sarajevo
Predrag Šaraba, "Elektroprenos - Elektroprijenos BiH" a.d. Banja Luka
Božidar Popović, Elektrotehnički fakultet Univerziteta u Istočnom Sarajevu

O-1.3 (39) Procjena stanja sinhronog generatora sa aspekta električnog izolacionog sistema
Branislav Bošković, Istraživačko razvojni centar elektroenergetike a.d. MH „ERS” – Matično preduzeće a.d. Trebinje
Srđan Jokić, Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet

O-1.4 (83) Real-Time Sag Estimation of Overhead Power Lines Based on Approximate Magnetic Field Model
Nemanja Kitić, University of Banja Luka, Faculty of Electrical Engineering
Petar Matić, University of Banja Luka, Faculty of Electrical Engineering
Đorđe Lekić, University of Banja Luka, Faculty of Electrical Engineering
Predrag Mršić, University of Banja Luka, Faculty of Electrical Engineering
Bojan Erceg, University of Banja Luka, Faculty of Electrical Engineering
Čedomir Zeljković, University of Banja Luka, Faculty of Electrical Engineering
Vanja Starčević, University of Banja Luka, Faculty of Electrical Engineering

O-1.5 (87) Kvantifikacija koeficijenta žilavosti u elektroenergetskim sistemima
Darko Šošić, Elektrotehnički fakultet
Mileta Žarković, Elektrotehnički fakultet
Goran Dobrić, Elektrotehnički fakultet
Vladimir Antonijević, Elektrotehnički fakultet
Zlatan Stojković, Elektrotehnički fakultet
Zoran Stojanović, Elektrotehnički fakultet

O-1.6 (186) Tehno-ekonomska analiza primene specijalnih provodnika tipa HTLS zbog povećanja prenosne moći dalekovoda 110kV radi priključenja SE snage 50MW
Uroš Jovanović, ELEM&ELGO d.o.o.
Ivica Bačvanski, ELEM&ELGO d.o.o.

O-2 - Oralna sesija 2 / Oral session 2
16.03.2022, 17.30 - 19.15, Sala 1 / Room 1

O-2.1 (6) Design and Verification of 22kW / 220Vdc Electromagnet for Separation of Steel Parts from Coal on Conveyor Belts for Delivery
Željko V. Despotović, Mihajlo Pupin Institute, University of Belgrade
Borko Ćupić, IMP-Projek Inzenjering, Belgrade
Đorđe Lekić, Faculty of Electrical Engineering, University of Banja Luka

O-2.2 (43) Towards the smart power plant: merging IIoT and traditional concepts
Saša Milić, Electrical Engineering Institute Nikola Tesla, University of Belgrade, Belgrade, Serbia
Denis Ilić, Electrical Engineering Institute Nikola Tesla, University of Belgrade, Belgrade, Serbia
Ljubiša Čičkarić, Electrical Engineering Institute Nikola Tesla, University of Belgrade, Belgrade, Serbia
Danilo Buha, Electrical Engineering Institute Nikola Tesla, University of Belgrade, Belgrade, Serbia
Aleksandar Rakić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Branislav Vulević, Accreditation Body of Serbia - ATS, Belgrade, Serbia

O-2.3 (63) Simulation of Dynamic Hysteresis Loops for Toroidal Sample for Sinusoidal Shape of Magnetic Flux Density
Srđan Divac, Faculty of Technical Sciences Čačak
Branko Koprivica, Faculty of Technical Sciences Čačak

O-2.4 (151) The Effect of Ambient Temperature on the Costs of Battery Electric Vehicles Charging in the Microgrid
Dario Javor, University of Niš, Faculty of Occupational Safety in Niš
Nebojša Raičević, University of Niš, Faculty of Electronic Engineering in Niš

O-2.5 (178) Uporedna analiza naprednih algoritama za optimizaciju kapaciteta moment-struja sinhronog motora sa utisnutim stalnim magnetima
Vladimir Popović, Faculty of technical sciences, University of Novi Sad
Stefan Simić, Faculty of technical sciences, University of Novi Sad
Vladimir Rajs, Faculty of technical sciences, University of Novi Sad
Darko Marčetić, Faculty of technical sciences, University of Novi Sad

O-2.6 (183) KOMPARATIVNA ANALIZA RAZLIČITIH TEHNOLOŠKIH REŠENJA FOTONAPONSKE ELEKTRANE NA PEPELIŠTU TE MORAVA
Matej Mićović, Elektrotehnički fakultet Univerziteta u Beogradu
Miloš Stojanović, Elektrotehnički fakultet Univerziteta u Beogradu
Milica Ašćerić, Elektrotehnički fakultet Univerziteta u Beogradu
Đorđe Lazović, Elektrotehnički fakultet Univerziteta u Beogradu
Željko Đurišić, Elektrotehnički fakultet Univerziteta u Beogradu

O-2.7 (184) KONCEPT I MATEMATIČKI MODEL ENERGETSKI SAMOODRŽIVOG DOMAĆINSTVA
Miloš Stojanović, Elektrotehnički fakultet Univerziteta u Beogradu
Milica Ašćerić, Elektrotehnički fakultet Univerziteta u Beogradu
Matej Mićović, Elektrotehnički fakultet Univerziteta u Beogradu
Đorđe Lazović, Elektrotehnički fakultet Univerziteta u Beogradu
Željko Đurišić, Elektrotehnički fakultet Univerziteta u Beogradu

O-3 - Oralna sesija 3 / Oral session 3
17.03.2022, 9.00 - 11.15, Sala 1 / Room 1

O-3.1 (135) Reverse Engineering of Relational Database Schema based on Universal Metadata Queries
Stefan Reljic, Mühlbauer Group Bosnia and Herzegovina
Drazen Brdjanin, University of Banja Luka
Goran Banjac, University of Banja Luka

O-3.2 (187) Collaboration of Heterogeneous Medical Information Systems in the Republic of Serbia
Anđelija Đorđević, Faculty of Electronic Engineering, University of Niš
Aleksandar Milenković, Faculty of Electronic Engineering, University of Niš
Dragan Janković, Faculty of Electronic Engineering, University of Niš
Petar Rajković, Faculty of Electronic Engineering, University of Niš
Aleksandar Spasić, Academy of Applied Technical and Educational Studies Niš

O-3.3 (121) A comparison between k-nearest neighbor and jk-nearest neighbor algorithms for signature verification
Mohammad Saleem, Budapest Uinversity of Technology and Economics
Bence Kovari, Budapest Uinversity of Technology and Economics

O-3.4 (145) Benchmark of a Method for Instrumented Tests Parallelization in Android Applications
Amer Ratković, Faculty of Electrical Engineering University of Sarajevo
Šeila Bećirović, Faculty of Electrical Engineering University of Sarajevo
Irfan Prazina, Faculty of Electrical Engineering University of Sarajevo
Vensada Okanović, Faculty of Electrical Engineering University of Sarajevo

O-3.5 (158) Detection and Logging Changes in Web Pages
Vildana Beglerović, Faculty of Electrical Engineering University of Sarajevo
Lejla Pirija, Faculty of Electrical Engineering University of Sarajevo
Irfan Prazina, Faculty of Electrical Engineering University of Sarajevo
Vensada Okanović, Faculty of Electrical Engineering University of Sarajevo

O-3.6 (71) CRM software as a service and importance of the approach for SMEs
Veselin Obradovic, Mediterranean University
Aleksandar Obradovic, University of Montenegro

O-3.7 (61) Jedna aplikacija za budžetsko knjigovodstvo
Marko Borak, Akademija tehničko-umetničkih strukovnih studija, Beograd
Boško Bogojević, Akademija tehničko-umetničkih strukovnih studija, Beograd
Zoran Ćirović, Akademija tehničko-umetničkih strukovnih studija, Beograd

O-3.8 (7) Sistem za prijavlјivanje ispita na dalјinu Visoke tehničke škole strukovnih studija u Zrenjaninu – perspektiva studenta
Željko Eremić, Visoka tehnička škola strukovnih studija u Zrenjaninu
Milana Drašković, Visoka tehnička škola strukovnih studija u Zrenjaninu
Dragan Halas, Visoka tehnička škola strukovnih studija u Zrenjaninu

O-3.9 (91) Estimacija pulsa na osnovu termovizijskih snimaka lica
Jelena Lazić, School of Electrical Engineering, University of Belgrade

O-4 - Oralna sesija 4 / Oral session 4
17.03.2022, 9.00 - 11.15, Sala 2 / Room 2

O-4.1 (76) Greške u proceni aproksimativne entropije
Dragana Bajic, Faculty of Technical Sciences Novi Sad
Nina Japundyic-Zigon, Faculty of Medicine, Belgrade

O-4.2 (54) Noise reduction quality test for two-photon laser scanning microscopic images
Tamara Škorić, Faculty of Technical Sciences, University of Novi Sad
Dragana Bajić, Faculty of Technical Sciences, University of Novi Sad

O-4.3 (55) Kompenzacija nelinearne distorzije kod hybrid beamforming MIMO predajnika
Tamara Muškatirović-Zekić, School of Electrical Engineering, University of Belgrade Belgrade, Serbia
Milan Čabarkapa, School of Electrical Engineering, University of Belgrade Belgrade, Serbia
Nataša Nešković, School of Electrical Engineering, University of Belgrade Belgrade, Serbia
Djuradj Budimir, School of Electrical Engineering, University of Belgrade Belgrade, Serbia

O-4.4 (79) Piecewise Uniform Quantization for One-Dimensional Two-Component GMM
Aleksandra Jovanović, Faculty of Electronic Engineering, University of Niš
Zoran Perić, Faculty of Electronic Engineering, University of Niš
Nikola Vučić, Faculty of Electronic Engineering, University of Niš

O-4.5 (90) Evaluation of Improved Classification of Speech-Like Waveforms Used for Secure Voice Transmission
Sara Čubrilović, School of Electrical Engineering, University of Belgrade; Vlatacom Institute
Duška Mandić, School of Electrical Engineering, University of Belgrade; Vlatacom Institute
Aleksandra Krstić, School of Electrical Engineering, University of Belgrade

O-4.6 (86) Automation of Industrial Control System Management Within Small-Size Wind Tunnel Based on Modbus Protocol Over Serial Connection
Stefan Stankovic, University of Belgrade - School of Electrical Engineering
Mladen Koprivica, University of Belgrade - School of Electrical Engineering
Bosko Bozilovic, Vlatacom Institute of High Technologies
Predrag Petronijevic, Vlatacom Institute of High Technologies
Srdjan Kostic, Vlatacom Institute of High Technologies

O-4.7 (136) Pregled propagacionih modela zasnovanih na deep learning tehnikama
Jelena Mladenović, Elektrotehnički fakultet, Univerzitet u Beogradu
Aleksandar Nešković, Elektrotehnički fakultet, Univerzitet u Beogradu
Nataša Nešković, Elektrotehnički fakultet, Univerzitet u Beogradu

O-5 - Oralna sesija 5 / Oral session 5
17.03.2022, 11.30 - 13.45, Sala 1 / Room 1

O-5.1 (35) Surface indicator of gait cycle variability based on Principal Component Analysis
Marija Gavrilović, University of Belgrade – School of Electrical Engineering
Milica Janković, University of Belgrade – School of Electrical Engineering

O-5.2 (23) Identification of protein complexes by overlapping community detection algorithms: A comparative study
Milica Jaguzović, Faculty of Natural Sciences and Mathematics University of Banja Luka
Milana Grbić, Faculty of Natural Sciences and Mathematics University of Banja Luka
Marko Đukanović, Faculty of Natural Sciences and Mathematics University of Banja Luka
Dragan Matić, Faculty of Natural Sciences and Mathematics University of Banja Luka

O-5.3 (114) A Python-based Pipeline for Processing and Plotting Automatisation of Nanoindentation Data
Miroslav Đoćoš, University of Novi Sad, Faculty of Technical Sciences
Marija Vejin, University of Novi Sad, Faculty of Technical Sciences
Lazar Milić, University of Novi Sad, Faculty of Technical Sciences
Sanja Brdar, University of Novi Sad, Institute BioSense
Bojan Petrović, University of Novi Sad, Faculty of Medicine
Sanja Kojić, University of Novi Sad, Faculty of Technical Sciences
Goran Stojanović, University of Novi Sad, Faculty of Technical Sciences

O-5.4 (123) Primjena stabala odlučivanja u predviđanju akademskog uspjeha studenata graditeljstva sa posebnim osvrtom na matematičke predmete
Ljubiša Preradović, Faculty of Architecture, Civil Engineering and Geodesy, University of Banja Luka
Snježana Maksimović, Faculty of Architecture, Civil Engineering and Geodesy, University of Banja Luka
Sandra Kosić-Jeremić, Faculty of Architecture, Civil Engineering and Geodesy, University of Banja Luka
Slavica Gajić, Faculy of Electrical Engineering, University of Banja Luka

O-5.5 (48) Forenzička analiza komercijalnih dronova
Jelena Gavrilović, Singidunum University
Marko Tanasković, University Singidunum
Miloš Stanković, University Singidunum
Aleksa Ćuk, University Singidunum

O-5.6 (157) Aspekti tehničke kulture u visokom obrazovanju informaciono tehnološkog kadra
Ljubica Popović, Fakultet tehničkih nauka Novi Sad, Srbija
Djordje Ćosić, Fakultet tehničkih nauka Novi Sad, Srbija
Srdjan Popov, Fakultet tehničkih nauka Novi Sad, Srbija

O-5.7 (77) Inovativne metode u nastavi tehnike i tehnologije
Đorđe Šarčević, Akademija strukovnih studija Šabac

O-5.8 (170) Razvoj interaktivnog elektronskog udžbenika za učenje matematike kod dece predškolskog uzrasta
Dražen Drašković, University of Belgrade - School of Electrical Engineering
Vanja Ivković, University of Belgrade - School of Electrical Engineering

O-5.9 (180) Development of Learning Factory Directory – DoLF
Miro Hegedić, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
Petar Gregurić, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
Matija Golec, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
Mihael Gudlin, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb

O-6 - Oralna sesija 6 / Oral session 6
17.03.2022, 11.30 - 13.45, Sala 2 / Room 2

O-6.1 (19) Analiza eksperimentalno određenih koeficijenata trenja klizanja materijala triboelemenata
Vladimir Blanuša, Visoka tehnička škola strukovnih studija-Novi Sad
Ivan Sovilj Nikić, Departman za proizvodno mašinstvo, Fakultet tehničkih nauka
Bogdan Sovilj, Departman za proizvodno mašinstvo, Fakultet tehničkih nauka
Sandra Sovilj Nikić, Pedagoški fakultet Univezitet u Novom Sadu
Dušan Gavanski, Visoka tehnička škola strukovnih studija-Novi Sad

O-6.2 (36) Analysis of geometric product specifications obtained by different 3D printing strategies
Miloš Ranisavljev, Faculty of technical sciences
Vladimir Blanuša, The Higher Education Technical School of Professional Studies
Dejan Movrin, Faculty of technical sciences
Branko Strbac, Faculty of technical sciences
Ivan Matin, Faculty of technical sciences
Miodrag Hadžistević, Faculty of technical sciences

O-6.3 (52) Condition, Development, Potential and Application of Electronic Treatment
Stefan Kirilov Kartunov, Technical University of Gabrovo
Milan Vesković, University of Kragujevac, Faculty of Technical Sciences Čačak

O-6.4 (69) Resekciona tumorska endoproteza „Spacer”
Jovan Grujić, DOO Grujić & Грујић
Slobodan Tabakovic, Faculty of technical sciences
Milan Zeljković, Faculty of technical sciences
Zoran Vučinić, IOHB Banjica
Aca Đorđević, IOHB Banjica
Nikica Mandić, IOHB Banjica
Nenad Lujić, IOHB Banjica
Stanislav Rajković, IOHB Banjica

O-6.5 (75) Ispitivanje tačnosti pozicioniranja mašina alatki sa hibridnom kinematikom prema standardu ISO 230-2
Aleksandar Budimir, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Slobodan Tabakovic, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Saša Živanović, Univerzitet u Beogradu, Mašinski fakultet
Zoran Dimić, Lola Institut, Beograd

O-6.6 (120) Effect of cutting parameters on surface roughness in turning of CPM 10V steel
Anđelko Aleksić, Faculty of Technical Sciences
Dragan Rodić, Faculty of Technical Sciences
Milenko Sekulić, Faculty of Technical Sciences
Marin Gostimirović, Faculty of Technical Sciences
Borislav Savković, Faculty of Technical Sciences

O-6.7 (127) ANALYSIS OF THE INFLUENCE OF SOME PARAMETERS ON THE MOVEMENT OF MACHINE TOOLS SLIDER
Dejan Marinković, Faculty of technical sciences
Milan Zeljković, Faculty of technical sciences
Cvijetin Mlađenović, Faculty of technical sciences
Miloš Knežev, Faculty of technical sciences

O-7 - Oralna sesija 7 / Oral session 7
17.03.2022, 15.00 - 16.00, Sala 1 / Room 1

O-7.1 (141) An Optimal Design of 2DoF FOPID/PID Controller using Non-symmetrical Optimum Principle for an AVR System with Time Delay
Marko Bošković, University of East Sarajevo, Faculty of Electrical Engineering
Tomislav Šekara, University of Belgrade, School of Electrical Engineering
Milan Rapaić, University of Novi Sad, Faculty of Technical Sciences

O-7.2 (131) Analitičko projektovanje PI/PID regulatora kaskadnih industrijskih procesa sa transportnim kašnjenjem pod ograničenjem na robusnost
Ivan Prelić, Univerzitet u Beogradu, Elektrotehnički fakultet
Tomislav Šekara, Univerzitet u Beogradu, Elektrotehnički fakultet
Marko Bošković, Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet

O-7.3 (133) Odnos proporcionalnog i širinsko impulsnog pneumatskog upravljanja iz aspekta pozicioniranja i potrošnje vazduha pod pritiskom
Vule Reljić, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Slobodan Dudić, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Dragan Šešlija, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Zoran Adamov, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Jovan Šulc, Univerzitet u Novom Sadu, Fakultet tehničkih nauka
Vladimir Jurošević, Univerzitet u Novom Sadu, Fakultet tehničkih nauka

O-8 - Oralna sesija 8 / Oral session 8
17.03.2022, 15.00 - 16.00, Sala 2 / Room 2

O-8.1 (84) Integrated video-based bee counting and multi-sensors platform for remote bee yard monitoring
Vanja Starčević, University of Banja Luka, Faculty of Electrical Engineering
Mitar Simić, University of Banja Luka, Faculty of Electrical Engineering
Vladimir Risojević, University of Banja Luka, Faculty of Electrical Engineering
Zdenka Babić, University of Banja Luka, Faculty of Electrical Engineering

O-8.2 (109) Bežični senzor dima sa LoRaWAN interfejsom
Jelena Janković, Meter&Control
Vladan Lapčević, School of Electrical Engineering
Nikola Cvetković, School of Electrical Engineering
Pavle Milenković, School of Electrical Engineering
Goran Rapić, Meter&Control
Vladimir Rajović, School of Electrical Engineering

O-8.3 (142) Ispitivanje uticaja nanetog sloja boje na površinske temperaturske varijacije laserski sinterovanog poliamida
Vesna Miletic, Filozofski fakultet, katedra za Fiziku Univerzitet u Istočnom Sarajevu Pale, Bosna i Hercegovina
Dragana Markushev, Institut za fiziku, Zemun Univerzitet u Beogradu
Dragan Markushev, Institut za fiziku, Zemun Univerzitet u Beogradu
Marica Popovic, Institut za fiziku, Zemun Univerzitet u Beogradu
Katarina Djordjevic, INN Vinča Univerzitet u Beogradu
Slobodanka Galovic, INN Vinča Univerzitet u Beogradu
Mioljub Nesic, INN Vinča Univerzitet u Beogradu

O-8.4 (143) Transmission pulse photoacoustic set-up for characterization of solids
Katarina Djordjevic, Vinca Institute of Nuclear Sciences -National Institute of the Republic of Serbia, University of Bel
Slobodanka Galovic, Vinca Institute of Nuclear Sciences -National Institute of the Republic of Serbia, University of Bel
Mioljub Nesic , Vinca Institute of Nuclear Sciences -National Institute of the Republic of Serbia, University of Bel
Dragan Todorovic, Institute for Multidisciplinary Researches, University of Belgrade
Marica Popovic , Institute of Physics Belgrade - National Institute of the Republic of Serbia, University of Belgrade
Dragan Markushev , Institute of Physics Belgrade - National Institute of the Republic of Serbia, University of Belgrade
Dragana Markushev, Institute of Physics Belgrade - National Institute of the Republic of Serbia, University of Belgrade

O-8.5 (167) Accuracy Assessment of Structured-Light Based Industrial Optical Scanner
Vedran Jovanović, University of Banja Luka
Velibor Đalić, University of Banja Luka
Petar Marić, University of Banja Luka

P-1 - Poster sesija 1 / Poster session 1
16.03.2022, 14.30 - 15.30, Sala 2 / Room 2

P-1.1 (94) Koncept realizacije sistema pametnog parkinga zasnovanog na mašinskom učenju
Tatjana Šestić, Fakultet tehničkih nauka Novi Sad
Miloš Kovač, Fakultet tehničkih nauka Novi Sad
Nemanja Tomović, Fakultet tehničkih nauka Novi Sad
Miloš Arbanas, Fakultet tehničkih nauka Novi Sad
Vladimir Rajs, Fakultet tehničkih nauka Novi Sad
Milica Kisić, Fakultet tehničkih nauka Novi Sad

P-1.2 (70) DEVELOPMENT OF A SMART HOME MODEL AS A NEW TEACHING TOOL WITHIN THE STEAM PROJECT TEACHING
Bozo Ilic, Visoka tehnička škola strukovnih studija Novi Sad
Branko Savic, Visoka tehnička škola strukovnih studija Novi Sad
Goran Grujic, Tehnicki skolski centar Zvornik. Republika Srpska

P-1.3 (25) Modern information systems in logistics processes
Srećko Ćurčić, Faculty of technical sciences in Čačak
Jelena Purenović, Faculty of technical sciences in Čačak
Milan Vesković, Faculty of technical sciences in Čačak

P-1.4 (21) Optimizing webpage layout for smartwatches - avoiding sticky menus
Tanja Krunić, The Higher Education Technical School of Professional Studies in Novi Sad
Petar Vasiljevic, The Higher Education Technical School of Professional Studies in Novi Sad

P-1.5 (139) Technical Translation and the Internet
Darko Kovačević, Faculty of Electrical Engineering, University of East Sarajevo

P-1.6 (165) Savremene Android aplikacije kao pomoćno sredstvo u nastavi solfeđa i teorije muzike u osnovnim muzičkim školama
Gordana Manojlović-Kovačević, JU Škola za osnovno muzičko obrazovanje, Istočno Novo Sarajevo

P-1.7 (124) Informisanje mladih putem društvenih mreža
Varvara Lazarević, Visoka tehnička škola strukovnih studija u Novom Sadu

P-1.8 (152) Digital Transformation in Healthcare: Healthcare on Demand
Sava Čavoški, Faculty of Economics, Finance and Administration, Metropolitan University
Vladimir Vujović, Faculty of Electrical Engineering, University of East Sarajevo
Vuk Devrnja, CoFounder & CEO, Doktorijum
Boris Ferenc, CoFounder & CCO, Doktorijum
Filip Lukić, CoFounder & CTO, Doktorijum

P-1.9 (166) The Role of Digital Competencies in the Process of Digital Transformation
Zorana Štaka, Faculty of Electrical Engineering, University of East Sarajevo
Milica Vuković, Faculty of Electrical Engineering, University of East Sarajevo
Vladimir Vujović, Faculty of Electrical Engineering, University of East Sarajevo

P-2 - Poster sesija 2 / Poster session 2
16.03.2022, 16.00 - 17.00, Sala 2 / Room 2

P-2.1 (49) Potential of Edge Computing PLCs in Industrial Automation
Zorana Mandić, University of East Sarajevo - Faculty of Electrical Engineering
Stevan Stankovski, University of Novi Sad - Faculty of Technical Sciences
Gordana Ostojić, University of Novi Sad - Faculty of Technical Sciences
Božidar Popović, University of East Sarajevo - Faculty of Electrical Engineering

P-2.2 (106) Tactile Internet in future industrial automation applications
Nataša Popović, Elektrotehnički fakultet, Univerzitet u Istočnom Sarajevu

P-2.3 (153) The Challenges and Opportunities in adopting AI, IoT and Blockchain technology in E-Government A Systematic Literature Review
Dušan Krstić, Faculty of technical science
Anđela Milićević, Faculty of technical science
Nina Kozma, Faculty of technical science
Aleksandar Ivić, Faculty of technical science
Sara Havzi, Faculty of technical science

P-2.4 (101) One Solution of System for Reducing Food Losses in Households based on IoT
Srdjan Tegeltija, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Branislav Tejić, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Laslo Tarjan, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Ivana Šenk, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Miloš Stanojević, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Mladen Babić, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Jasna Mastilović, Institute of Food Technology, University of Novi Sad, Novi Sad, Serbia

P-2.5 (155) Towards the Implementation of IoT System for Preservation: the Church of Holy Archangels Michael and Gabriel Case Study
Mirjana Maksimovic, University of East Sarajevo, Faculty of Electrical Engineering
Marijana Cosovic, University of East Sarajevo, Faculty of Electrical Engineering

P-2.6 (137) Razumljivost govora u prisustvu ranih refleksija, sirena smetnje i difuznog šuma
Zoran Milivojević, Akademija tehničkovaspitačkih strukovnih studija Niš
Dijana Kostić, “Geonais” Niš
Marina Milivojević, Dom Zdravlja Brus
Bojan Prlinčević, Akademija kosovo-metohijska, Leposavić

P-2.7 (103) Robusnost vodenog žiga audio signala na ekvalizaciju realizovanu pojačanjem shelving filtrom
Bojan Prlinčević, Kosovo and Metohija Academy
Zoran Milivojević, Academy of technical and educational vocational studies
Nataša Savić, Academy of technical and educational vocational studies
Dijana Kostic, Geonais

P-2.8 (172) OPTIMIZATION OF PARAMETERS OF THE 2P FIFTH DEGREE INTERPOLATION KERNEL FOR INTERPOLATION OF AUDIO SIGNALS
Nataša Savić, Akademija tehničko-vaspitačkih strukovnih studija, Odsek Niš
Zoran Milivojević, Akademija tehničko-vaspitačkih strukovnih studija, Odsek Niš

P-2.9 (56) Pedestrian detection in autonomous vehicles using ultrasonic and passive infrared sensors
Aleksandar Stjepanovic, University of East Sarajevo, Faculty of Transport and Traffic Engineering in Doboj
Zoran Ćurguz, University of East Sarajevo, Faculty of Transport and Traffic Engineering in Doboj
Miroslav Kostadinovic, University of East Sarajevo, Faculty of Transport and Traffic Engineering in Doboj
Gordana Jotanovic, University of East Sarajevo, Faculty of Transport and Traffic Engineering in Doboj
Mirko Stojčić, University of East Sarajevo, Faculty of Transport and Traffic Engineering in Doboj
Goran Kuzmić, University of East Sarajevo, Faculty of Transport and Traffic Engineering in Doboj

P-3 - Poster sesija 3 / Poster session 3
16.03.2022, 17.30 - 18.30, Sala 2 / Room 2

P-3.1 (26) Analysis of Power Distribution Line Outage Based on Measurements and Simulations
Almina Džanan, University of Sarajevo, Faculty of Electrical Engineering
Selma Grebović, University of Sarajevo, Faculty of Electrical Engineering
Senad Smaka, University of Sarajevo, Faculty of Electrical Engineering
Vahid Helać, University of Sarajevo, Faculty of Electrical Engineering

P-3.2 (11) REGULACIJA BRZINE ODMOTAVAČA POMOĆU PID REGULATORA SA UKLJUČENJEM/ISKLJUČENJEM I, D DEJSTVA PREMA ZADATIM KRITERIJUMIMA
Igor Kocić, Elektronski fakultet u Nišu
Zoran Jovanović, Elektronski fakultet u Nišu

P-3.3 (68) Study of Lightning Overvoltages Protection of 400 kV Gas Insulated Substation
Najla Delić, University of Sarajevo, Faculty of Electrical Engineering
Selma Grebović, University of Sarajevo, Faculty of Electrical Engineering
Senad Smaka, University of Sarajevo, Faculty of Electrical Engineering
Harun Kartal, University of Sarajevo, Faculty of Electrical Engineering

P-3.4 (74) A Power Flow Method for Unbalanced Three-Phase Distribution Networks with Nonlinear Loads
Miloš Milovanović, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Jordan Radosavljević, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Nebojša Arsić, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Bojan Perović, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica

P-3.5 (104) Effects of Neutral Point Grounding Methods on Single-Phase Short Circuit Fault Characteristics
Amela Kokor, University of Sarajevo, Faculty of Electrical Engineering
Senad Smaka, University of Sarajevo, Faculty of Electrical Engineering
Selma Grebović, University of Sarajevo, Faculty of Electrical Engineering
Vahid Helać, University of Sarajevo, Faculty of Electrical Engineering

P-3.6 (176) Impact assessment of irradiance and temperature variation on PV system current harmonics injection
Marko Ikić, University of Belgrade
Bojana Čolić, University of Belgrade
Jovan Mikulović, University of Belgrade
Srđan Jokić, University of East Sarajevo

P-3.7 (78) Parameters estimation of double-cage induction motors using a hybrid metaheuristic algorithm
Jovan Vukašinović, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Miloš Milovanović, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Nebojša Arsić, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Jordan Radosavljević, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica
Saša Štatkić, Faculty of Technical Sciences, University of Priština in Kosovska Mitrovica

P-3.8 (161) Assessment of the Optimal Manufacturing Technology of the Brake Triangle Sleeve Casting Model Prototype using Multi-criteria Analysis
Petar Đekić, Academy of Technical-Educational Vocational Studies
Biljana Milutinović, Academy of Technical-Educational Vocational Studies
Miloš Ristić, Academy of Technical-Educational Vocational Studies

P-3.9 (116) Analiza uticaja vibracija pri razvoju noseće konstrukcije bicikle
Gordana Jović, Akademija tehničko-vaspitačkih strukovnih studija - Niš
Nikola Kostić, Akademija tehničko - vaspitačkih strukovnih studija - Niš

P-3.10 (154) Experimental Investigation of Heat Transfer Process in a Perforated Plate Heat Exchanger
Mladen Tomić, University of Novi Sad, Faculty of Technical Sciences
Miroslav Kljajić, University of Novi Sad, Faculty of Technical Sciences
Aleksandar Anđelković, University of Novi Sad, Faculty of Technical Sciences
Predrag Živković, University of Niš, Faculty of Mechanical Engineering
Mića Vukić, University of Niš, Faculty of Mechanical Engineering

STS - Studentska sesija / Students' session
17.03.2022, 16.30 - 18.30, Sala 2 / Room 2

STS.1 (117) Design of Information System for Bookstore support
Nina Kozma, Faculty of Technical Sciences, University of Novi Sad
Dušan Krstić, Faculty of Technical Sciences, University of Novi Sad

STS.2 (149) Design Of Information System To Support Movie Ticket Booking And Cinema Operations
Sara Lazarevic, Faculty of technical sciences
Tamara Zuvela, Faculty of technical sciences

STS.3 (179) Aplikacija za praćenje realizacije ugovora javnih nabavki
Zoran Tošić, Elektrotehnički fakultet Istočno Sarajevo
Bogdan Borovčanin, Elektrotehnički fakultet Istočno Sarajevo

STS.4 (57) Korištenje Rsync uslužnog programa za sinhronizaciju podataka između servera
Marko Marinković

STS.5 (66) Selection of SiC MOSFET power switch driver
Tijana Begović, Faculty of Electrical Engineering, University of East Sarajevo

STS.6 (102) Primjena tehnologije virtuelne realnosti u različitim sferama nauke, društva i industrije
Milica Okuka, Fakultet tehničkih nauka

STS.7 (144) Modeling of Synchronous Reluctance Motor and Open and Closed Loop Speed Control
Deniz Can Dursun, Firat University
Ahmet Yildiz, Firat University
Mehmet Polat, Firat University

STS.8 (100) Designing an information system to support the business of the taxi service
Sofija Djordjevic, Faculty of Technical Sciences

VRT-1 - Virtuelna sesija 1 / Virtual session 1
18.03.2022, 10.00 - 12.30, online

VRT-1.1 (4) Research and Development on Mobile Powered Upper-Body Exoskeletons for Industrial Usage
Fuat Ozan Dengiz

VRT-1.2 (9) Visualization of objects in computer tomography
Teodora Petrova, Trakia University
Zhivo Petrov, Rakovski National Defence College

VRT-1.3 (53) A Compensation of Commutation Angle in Hall-Sensor-Controlled Brushless DC Motors for Maximum Torque per Ampere Operation
Jinhe Zhou, Univeristy of British Columbia
Jia Lu, Univeristy of British Columbia
Seyyedmilad Ebrahimi, Univeristy of British Columbia
Juri Jatskevich, Univeristy of British Columbia

VRT-1.4 (96) One solution to the system architecture for the acquisition of data obtained by monitoring computer users
Dušan Bogdanović, University of Novi Sad, Faculty of Technical Sciences
Srđan Sladojević, University of Novi Sad, Faculty of Technical Sciences
Marko Arsenović, University of Novi Sad, Faculty of Technical Sciences
Andraš Anderla, University of Novi Sad, Faculty of Technical Sciences

VRT-1.5 (168) Screen-Printing Process for Stretchable Electronics
Ivanka Stanimirović, Vinča Institute of Nuclear Sciences
Zdravko Stanimirović, Vinča Institute of Nuclear Sciences
Anđelka Jolić, Vinča Institute of Nuclear Sciences
Katarina Đorđević, Vinča Institute of Nuclear Sciences
Edin Suljovrujić, Vinča Institute of Nuclear Sciences

VRT-1.6 (126) Application Features of the Correlation Measurement Method in Ultrasonic Liquid Flowmeters at a Low Sampling Rate of Signals
Sergey Gerasimov, Moscow Power Engineering Institute "MPEI"
Vladimir Glushnev, Moscow Power Engineering Institute "MPEI"

VRT-1.7 (129) Internet of Things (IoT) Application for Temperature Control in Residential Premises
Iordan Stoev, University of Ruse „Angel Kanchev”
Snezhinka Zaharieva, University of Ruse „Angel Kanchev”
Adriana Borodzhieva, University of Ruse „Angel Kanchev”

VRT-1.8 (177) A normalised gradient descent PI controller for speed servomechanism
Bojan Derajić, University of Banja Luka
Igor Krčmar, University of Banja Luka
Petar Marić, University of Banja Luka
Petar Matić, University of Banja Luka
Darko Marčetić, University of Novi Sad

VRT-1.9 (34) LOS rate estimation techniques for proportional navigation guided missiles
Mirza Hodžić, University of Tuzla
Naser Prljača, University of Tuzla

VRT-1.10 (51) Fractional order calculus for fetal pulse detection
Ilija Tanasković, University of Belgrade - School of Electrical Engineering
Nadica Miljković, University of Belgrade - School of Electrical Engineering

VRT-1.11 (125) Digitalna efekt pedala
Damjan Prerad, Elektrotehnički fakultet u Banjoj Luci
Branko Blanuša, Elektrotehnički fakultet u Banjoj Luci

VRT-1.12 (132) Automation of Operation Control of the Human Centrifuge
Pavle Stepanić, LOLA Institute
Nenad Bačević, Aero Medical Institute
Jelena Vidaković, LOLA Institute
Aleksa Krošnjar, LOLA Institute
Zoran Dimić, LOLA Institute

VRT-2 - Virtuelna sesija 2 / Virtual session 2
18.03.2022, 10.00 - 12.30, online

VRT-2.1 (171) A Proposal for Universal Preprocessing and Text-Embedded Programming (PTEP) System
Vlado Keselj, Dalhousie University

VRT-2.2 (80) Enhancing transparency and fairness in public procurement process with the support of blockchain technology: a smart contract based approach
Denis Čeke, University of Zenica
Suad Kunosić, University of Tuzla
Nevzudin Buzađija, University of Zenica

VRT-2.3 (111) Development Of Models Of Smart Intersections In Urban Areas Based On IoT Technologies
Zoran Pavlović, Belgrade Academy of Technical and Art Applied Studies, College of Railway Engineering

VRT-2.4 (113) Technologies of electronic business in traffic
Zoran Pavlović, Belgrade Academy of Technical and Art Applied Studies, College of Railway Engineering

VRT-2.5 (140) Database Model for Monitoring the Exchange of Data Between Participants in the Electricity Market According to the EDI Standard
Dragoljub Krneta, Dwelt Software
Sofija Krstev, Dwelt Software

VRT-2.6 (164) Data Warehouse to Support Creation of Key Performance Indicators (KPIs) in Electricity Supply
Sofija Krstev, Dwelt Software
Dragoljub Krneta, Dwelt Software

VRT-2.7 (59) Project-Based Learning for Teaching the Knapsack Problem in the Course Telecommunication Security
Adriana Borodzhieva, University of Ruse "Angel Kanchev"

VRT-2.8 (73) Endangered data in Moodle platform with malicious plugins
Đorđe Milošević, MUP
Kristijan Kuk, University of Criminal Investigation and Police Studies
Brankica Popović, University of Criminal Investigation and Police Studies
Petar Čisar, University of Criminal Investigation and Police Studies

VRT-2.9 (105) Exploring factors influencing the e-learning system success: a student perspective
Teodora Lolić, Faculty of Technical Sciences, University of Novi Sad
Veljko Ilić, Faculty of Technical Sciences, University of Novi Sad
Sonja Ristić, Faculty of Technical Sciences, University of Novi Sad
Danijela Ćirić, Faculty of Technical Sciences, University of Novi Sad
Sara Havzi, Faculty of Technical Sciences, University of Novi Sad

VRT-2.10 (108) Implementation of Kogge-Stone Adders Using Computer-Based Tools
Adriana Borodzhieva, University of Ruse "Angel Kanchev"

VRT-2.11 (148) Conceptual Model of a Quality Assurance System in Higher Education
Stanka Hadzhikoleva, University of Plovdiv Paisii Hilendarski
Asen Uzunov, University of Plovdiv Paisii Hilendarski
Emil Hadzhikolev, University of Plovdiv Paisii Hilendarski
Stoyan Cheresharov, University of Plovdiv Paisii Hilendarski

VRT-2.12 (8) Continued Supporting a Systematic Literature Review by Applying Text Mining Methods
Tsvetanka Georgieva-Trifonova, University of Veliko Tarnovo

VRT-2.13 (42) Softverski alat kao pomoćno sredstvo za učenje leksičke i sintaksne analize
Nenad Jovanović, Fakultet tehničkih nauka, Univerzitet u Prištini, Kosovska Mitrovica
Srećko Stamenković, Odsek Viskoka poslovna škola Blace, Akademija strukovnih studija Južna Srbija
Miloš Cvjetković, Odsek Viskoka poslovna škola Blace, Akademija strukovnih studija Južna Srbija
Zoran Jovanović, Odsek Viskoka poslovna škola Blace, Akademija strukovnih studija Južna Srbija

VRT-3 - Virtuelna sesija 3 / Virtual session 3
18.03.2022, 13.00 - 15.30, online

VRT-3.1 (12) A Deadlock Recovery Policy for Flexible Manufacturing Systems with Minimized Traversing within Reachability Graph
Iwona Grobelna, University of Zielona Gora
Andrei Karatkevich, AGH University of Science and Technology

VRT-3.2 (47) Performance simulation for LCR of a NFV-based 5G network with L-branch SC receiver in α-k-µ fading and α-η-µ interference environment
Radiša Stefanović, Academy of Technical Vocational Studies, Belgrade
Suad Suljović, Academy of Technical Vocational Studies, Belgrade
Dejan Milić, Faculty of Electronic Engineering, University of Niš
Dejan Rančić, Faculty of Electronic Engineering, University of Niš
Nenad Petrović, Faculty of Electronic Engineering, University of Niš

VRT-3.3 (89) Strategies for Jamming in Discrete Frequency Subbands – Characteristics and Main Applications
Aleksandar Lebl, IRITEL
Predrag Petrović, IRITEL
Jovan Radivojević, IRITEL

VRT-3.4 (95) Širokopojasna komunikacija preko elektroenergetske mreže, BB-PLC – G.hn, HomePlug i IEEE 1901
Dejan Nemec, Fakultet tehničkih nauka
Aljoša Petojević, Smart Digital

VRT-3.5 (163) Intrusion Detection Systems in Smart Grid
Slavica Boštjančič Rakas, Mihailo Pupin Institute, University of Belgrade
Valentina Timčenko, Mihailo Pupin Institute, University of Belgrade
Milenko Kabović, Mihailo Pupin Institute, University of Belgrade
Anka Kabović, Mihailo Pupin Institute, University of Belgrade

VRT-3.6 (169) Real-Time Data Processing Techniques for a Scalable Spatial and Temporal Dimension Reduction
Aleksandar Gavrić, School of Computing, Union University
Dušan Vujošević, School of Computing, Union University
Nemanja Radosavljević, School of Computing, Union University
Petar Prvulović, School of Computing, Union University

VRT-3.7 (174) Analysis of the Cooperative NOMA performance systems with Energy Harvesting strategies
Chaabane SOUMALI, Université Docteur Yahia Fares medea
Mounir BELATTAR, Université 020 Aout 1955 SKIKDA

VRT-3.8 (10) Application of Contrastive Multiview Coding in Audio Classification
Milomir Babić, Syrmia LLC
Vladimir Risojević, Faculty of Electrical Engineering, University of Banja Luka

VRT-3.9 (188) Long-term prediction of nitrogen dioxide concentrations using seasonal decomposition
Boris Bizjak, University of Maribor, FERI

VRT-3.10 (156) TRAFFIC ANALYSIS OF A3 TOPOLOGY CONSTRUCTION PROTOCOL IN WIRELESS SENSOR NETWORKS
Nemanja Radosavljević, School of Computing, Union University
Petar Prvulović, School of Computing, Union University
Dušan Vujošević, School of Computing, Union University
Aleksandar Gavrić, School of Computing, Union University

VRT-3.11 (134) Superconducting quantum metamaterial as photonic crystal
Zoran Ivić, Institute of Nuclear Sciences Vinca, University of Belgrade
Dalibor Čevizović, Institute of Nuclear Sciences Vinca, University of Belgrade
Željko Pržulj, Institute of Nuclear Sciences Vinca, University of Belgrade

VRT-3.12 (130) On Different Criteria for Optimizing the Two-bit Uniform Quantizer
Jelena Nikolić, Department of Telecommunications, Faculty of Electronic Engineering, University of Nis
Zoran Perić, Department of Telecommunications, Faculty of Electronic Engineering, University of Nis
Stefan Tomić, School of Engineering and Technology, Al Dar University College, Dubai
Danijela Aleksić, Department of mobile network Niš, Telekom Srbija

VRT-3.13 (85) Weather Condition Classification in Vehicle Environment Based on Front-View Camera Images
Jakob Triva, University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology
Ratko Grbić, University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology
Mario Vranješ, University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology
Nikola Teslić, University of Novi Sad, Faculty of Technical Sciences

VRT-4 - Virtuelna sesija 4 / Virtual session 4
18.03.2022, 13.00 - 15.30, online

VRT-4.1 (1) Writer Identification From Historical Documents Using Ensemble Deep Learning Transfer Models
Radmila Janković Babić, Mathematical Institute of the Serbian Academy of Sciences and Arts
Alessia Amelio, University "G. d'Annunzio" Chieti-Pescara
Ivo R. Draganov, Technical University of Sofia

VRT-4.2 (2) Measuring the Similarity in 2D: the Case Study of the Extremely Low Frequency Magnetic Field
Alessia Amelio, University "G. d'Annunzio" Chieti-Pescara
Radmila Janković Babić, Mathematical Institute of the Serbian Academy of Sciences and Arts
Ivo R. Draganov, Technical University of Sofia

VRT-4.3 (16) 3D Vehicle Pose Estimation from an Image Using Geometry
Nikola Stojanovic, Machine Can See d.o.o
Vasilije Pantić, Machine Can See d.o.o
Vladan Damjanović, Machine Can See d.o.o
Srđan Vukmirović, Faculty of Technical Sciences, University of Novi Sad

VRT-4.4 (32) Detection of Plant Diseases Using Leaf Images and Machine Learning
Almira Suljović, Faculty of Applied Sciences, University of Donja Gorica
Stevan Čakić, Faculty for Information Systems and Technologies, University of Donja Gorica
Tomo Popović, Faculty for Information Systems and Technologies, University of Donja Gorica
Stevan Šandi, Faculty for Information Systems and Technologies, University of Donja Gorica

VRT-4.5 (41) Face Mask Detection Based on Machine Learning and Edge Computing
Ivan Jovović, University of Donja Gorica
Dejan Babić, University of Donja Gorica
Stevan Čakić, University of Donja Gorica
Tomo Popović, University of Donja Gorica
Srdjan Krčo, DunavNET
Petar Knežević, DunavNET

VRT-4.6 (44) Bad news or good news when recognizing emotional valence using phonemic content
Velina Slavova, New Bulgarian University
Filip Andonov, New Bulgarian University

VRT-4.7 (18) File system performance for type-1 hypervisors on the Xen and VMware ESXi
Borislav Đorđević, Mihajlo Pupin Institute, University of Belgrade
Valentina Timčenko, Mihajlo Pupin Institute, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Dušan Sakić, VISER, School of Electrical and Computer Engineering of Applied Studies Belgrade, Serbia
Nikola Davidović, Faculty of Electrical Engineering University of East Sarajevo, RS, BiH

VRT-4.8 (40) AWS Cost Optimization
Prof. Sushma E, PES University
Aishwarya Dharniraj, PES University
Varshini G, PES University
Swarup Banik, PES University
Celin Joby, PES Uinveristy

VRT-4.9 (50) Performance comparison of Docker and Podman container-based virtualization
Borislav Đorđevic, Mihajlo Pupin Institute, University of Belgrade
Valentina Timčenko, Mihajlo Pupin Institute, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Milovan Lazić, VISER, School of Electrical and Computer Engineering of Applied Studies Belgrade, Serbia
Nikola Davidović, Faculty of Electrical Engineering University of East Sarajevo, RS, BiH

VRT-4.10 (64) Windows 10 OS Vulnerability assessment and exploitation
Jasmin Softić, Faculty of Computer Science Sarajevo School of Science and Technology
Zanin Vejzović, Faculty of Computer Science Sarajevo School of Science and Technology

VRT-4.11 (98) Machine learning driven course recommendation system
Sara Lazarevic, Faculty of Technical Sciences
Sofija Djordjevic, Faculty of Technical Sciences
Tamara Zuvela, Faculty of Technical Sciences
Srdjan Sladojevic, Faculty of Technical Sciences
Marko Arsenovic, Faculty of Technical Sciences

VRT-4.12 (162) Combining Container Orchestration and Machine Learning in the Cloud: a Systematic Mapping Study
Nikolas Naydenov, Sofia University, Faculty of Mathematics and Informatics
Stela Ruseva, Sofia University, Faculty of Mathematics and Informatics

VRT-4.13 (67) Performance Evaluation of Traffic Congestion Detection Algorithms in Real-Life Scenarios
Mohammad Bawaneh, Budapest University of Technology and Economics
Vilmos Simon, Budapest University of Technology and Economics

VRT-5 - Virtuelna sesija 5 / Virtual session 5
18.03.2022, 16.00 - 18.00, online

VRT-5.1 (60) PV system site selection using PVGIS and Fuzzy AHP
Haris Ahmetović, International Burch University
Elmin Nukić, International Burch University
Jasna Hivziefendić, International Burch University
Mirza Šarić, International Burch University
Mirza Ponjavić, International Burch University

VRT-5.2 (81) Investigation of Torque-Angle Characteristics of Synchronous Generators for Transient Stability Analysis Using Equal Area Criterion
Arash Safavizadeh, University of British Columbia
Erfan Mostajeran, University of British Columbia
Seyyedmilad Ebrahimi, University of British Columbia
Juri Jatskevich, University of British Columbia

VRT-5.3 (82) Combined peak shaving/time shifting strategy for microgrid controlled renewable energy efficiency optimization
Teodora Iuliana Mindra, Societatea de Inginerie Sisteme (SIS) SA
Gheorghe Florea, Societatea de Inginerie Sisteme (SIS) SA
Oana Gabriela Chenaru, Faculty of Automatic Control and Computers University Politehnica University
Radu Dobrescu, Faculty of Automatic Control and Computers University Politehnica University
Lucian Toma, Faculty of Power Engineering University Politehnica University

VRT-5.4 (118) Application of Chebyshev Polynomials to Assess the Active Power Error Caused by ADC Nonlinearity
Andrey Serov, National Research University “Moscow Power Engineering Institute”
Kirill Ivanenko, National Research University “Moscow Power Engineering Institute”
Gennady Antipov, National Research University “Moscow Power Engineering Institute”

VRT-5.5 (160) Analyzing the Еffects of Abnormal Resonance Voltages using Artificial Neural Networks
Vladislav Kuchanskyy, The Institute of Electrodynamics of NASU
Olena Rubanenko, Vinnytsia National Technical University
Marijana Cosovic, University of East Sarajevo, Faculty of Electrical Engineering
Iryna Hunko, Vinnytsia National Technical University

VRT-5.6 (185) Piece-wise Fourier transform of aperiodic functions
Vesna Javor, University of Nis, Faculty of Electronic Engineering

VRT-5.7 (5) Digital Implementation of MPPT Algorithm in Cuk DC/DC Power Converter Based on PIC18F4520 Microcontroller
Boban Đorđević, Institute Mihajlo Pupin, University of Belgrade, Department of Automation and Control System
Željko V. Despotović, Mihajlo Pupin Institute, University of Belgrade

VRT-5.8 (24) Višestepena brza regulacija frekvencije u sistemima male inercije
Jelena Stojković, Elektrotehnički fakultet, Univerzitet u Beogradu
Predrag Stefanov, Elektrotehnički fakultet, Univerzitet u Beogradu

VRT-6 - Virtuelna sesija 6 / Virtual session 6
18.03.2022, 16.00 - 18.00, online

VRT-6.1 (15) Smart Production Systems: Methods and Application
Milovan Lazarević, University of Novi Sad, Faculty of Technical Sciences, Centar za identifikacione tehnologije
Gordana Ostojić, University of Novi Sad, Faculty of Technical Sciences, Centar za identifikacione tehnologije
Dejan Lukić, University of Novi Sad, Faculty of Technical Sciences
Mijodrag Milošević, University of Novi Sad, Faculty of Technical Sciences
Aco Antić, University of Novi Sad, Faculty of Technical Sciences

VRT-6.2 (28) Transformation towards Smart Working: Research proposal
Marko Samardzic, Faculty of Technical Sciences
Darko Stefanović, Faculty of Technical Sciences
Uglješa Marjanović, Faculty of Technical Sciences

VRT-6.3 (119) Welding of S690QL steel in the automotive industry
Bożena Szczucka-Lasota, Silesian University of Technology
Tomasz Węgrzyn, Silesian University of Technology
Wojciech Tarasiuk, Bialystok University of Technology
Jan Piwnik, WSB University Gdansk
Krzysztof Ireneusz Wilczyński, Bialystok School of Economics

VRT-6.4 (150) Analysis of changes of NiTi alloys in different marine environments
Mirjana Beko, Faculty of Maritime Studies Kotor, University of Montenegro
Ilija Knežević, Faculty of Maritime Studies Kotor, University of Montenegro
Nemanja Pudar, Faculty of Maritime Studies Kotor, University of Montenegro
Tatijana Dlabač, Faculty of Maritime Studies Kotor, University of Montenegro
Špiro Ivošević, Faculty of Maritime Studies Kotor, University of Montenegro

VRT-6.5 (182) Emission of airborne wear particles from a intermetal Fe3Al and stellite 6 sliding on steel
Wojciech Tarasiuk, Bialystok University of Technology
Bozena Szczucka-Lasota, Silesian University of Technology
Tomasz Wegrzyn, Silesian University of Technology
Jan Piwnik, WSB University Gdansk
Piotr Cybulko, Medgal Sp. z o. o.,

VRT-6.6 (27) Simulation model of the electron beam welding process for the formation of the effective technological parameters during the welding of aerospace structures
Sergei Kurashkin, Reshetnev Siberian State University of Science and Technology
Vladimir Bukhtoyarov, Reshetnev Siberian State University of Science and Technology
Aleksander Myrugin, Reshetnev Siberian State University of Science and Technology
Aleksey Bocharov, Reshetnev Siberian State University of Science and Technology
Yuriy Seregin, Reshetnev Siberian State University of Science and Technology
Daria Rogova, Reshetnev Siberian State University of Science and Technology

VRT-6.7 (20) Software for modeling brazing process of spacecraft elements from widely used alloys
Vadim Tynchenko, Reshetnev Siberian State University of Science and Technology
Vladimir Bukhtoyarov, Reshetnev Siberian State University of Science and Technology
Daria Rogova, Reshetnev Siberian State University of Science and Technology
Aleksandr Murygin, Reshetnev Siberian State University of Science and Technology
Yuriy Seregin, Reshetnev Siberian State University of Science and Technology
Aleksey Bocharov, Reshetnev Siberian State University of Science and Technology

VRT-6.8 (92) Kinematic structure and workspace analysis of a parallel kinematic machine based on Lambda mechanism with actuated translation joints
Ljubomir Nešovanović, LOLA Institute
Saša Živanović, University of Belgrade, Faculty of Mechanical Engineering

VRT-6.9 (93) Verification of kinematic equations for a five-axis, table tilting machine tool
Julija Maletić, LOLA Institute
Saša Živanović, University of Belgrade, Faculty of Mechanical Engineering